Kyasol - The home of green technology
 Wireless Sensors   Home | Downloads | Partners | Company | Contact  
 

Wireless Sensors

Motion/Brightness Sensors | Window/Door Contact | Window Handle | Outdoor Sensors | Room Sensors
Humidity/Temperature Sensors | Hotel Card Switch | Timer
 

Wireless Motion/Brightness Sensors

Wireless PIR Motion/Brightness Sensor
Ceiling mounted multi-sensor for detection of light and motion.

FBH
Battery-less motion/brightness sensor is powered by
a solar cell module.
A signal is transmitted upon movement every 100 seconds
with a change in brightness of min. 10 lux.
Dimensions: 108 x 108mm and 26mm in depth.
Measuring range of 0 - 512 Lux.
Detection method: PIR (Passive infrared)
Detection range of 5m diameter at a height of 2,5m.
When motion is detected, a signal is sent immediately
and switching take place.
The time delay is set on the actuator or software which will
switch the load off after the time period has elapsed and no
movement was detected in the time period.
FBH is used for light and air-con control, it can also be configured
as a security device together with the software.
 

Detection Range

FBH Detection Range
 
FBH Data sheet
| Operation Manual
 

Wall Mounted Wireless Motion/Brightness Sensor for wall
mounted application.

FBH55AP
Power supply with integrated solar cell requires no installation
depth behind the mounting plate. It can be stuck to any
flat surface.
Transmits a signal to the wireless network every 100 seconds
with a change in brightness of Min 10 lux. A status message is
sent every 20 minutes.
Dimensions: 80 x 151mm with a 30mm height.
FBH55 is used for light typically in walkways, stairways and entrances.
Can also be configured as a security device together with the software.
Supplied in the same colours as the flat switches.
 



FBH55AP Data sheet
| Operation Manual

Top of page
 
 
 

Wireless Window/Door Contact

Window contact for status monitoring of windows and
doors, power supplied via the solar cell.

FTK Window/Door contact
Battery-less window contact uses ambient light >50 lux to
power the sensor and charges super cap night operation.
A signal is transmitted when the contact is opened or closed.
Every 15 minutes a signal indicating the current status is also
transmitted.
Dimensions
110 x 19mm, 15mm high
75 x 25mm, 12mm high
Magnet:
23 x 14mm, 6mm high
37 x 10mm, 6mm high
FTK is switching actuators, up to 32 FAIT's are possible to
one actuator.
FTK is used for heating/cooling element control, status
monitoring and as a security device.
Available colours
pure white
silver grey
anthracite
 
FTK Data sheet
| Operation Manual

Top of page
 
 
 

Wireless Window Handle

Window handle for status monitoring for windows.

FHF Window handle
Power supplied via the movement action of the handle.
Electrodynamics energy generator.
A signal is transmitted upon the actuation of the handle.
Various designs:
pure white
aluminium steel
stainless steel matt
polished brass
Dimensions: 165 x 35mm, 16mm height
SRG01 is used for heating/cooling element and status
monitoring.
FHFS with lock.


 
FHF Data sheet

Top of page
 
 
 

Wireless Outdoor Brightness Sensor

Brightness Sensor for Outdoor Lighting

FAH60 Outdoor brightness sensor
The wireless outdoor brightness sensor is powered by a solar
module which covers a range from 300 to 30 000 Lux.
It transmits a signal to the wireless network every time there is
a change of more than approx. 500 Lux with approx. 10 seconds.
If the brightness de os not change, a control signal is sent approx.
every 100 seconds.
Dimensions: 61 x 45mm, 30mm deep.
FAH is used for blind control, shading elements and daylight
harvesting according to the outdoor and indoor light differences.
 
FAH60 Data sheet | Operation Manual

Top of page
 
 
 

Room Sensors- Temperature, Humidity & CO

Room sensor for heating, cooling and ventilation

Room Sensors
Battery-less room sensor harvest it's own energy through the solar cell
for operating power
A signal is transmitted every 100 seconds (adjustable) or if there are
changes of 0.8K.
Dimensions: 85 x 85mm, 25mm high
Measuring ranges:
 
Temperature 00C - +400C
Humidity 0 - 100 %rH
CO₂ 0 - 2000 ppm

Types Available

Room temperature sensor
Room temperature sensor with set point adjustment
Room temperature sensor with set point adjustment, presence key
Room temperature sensor with set point adjustment, presence key,
fan speed switch
Room temperature sensor with set point adjustment, slide switch 0/I
Room temperature sensor, CO₂ humidity sensor
 
SR04 Data sheet

Top of page
 
 
 

Wireless Humidity/Temperature Sensors

Wireless temperature sensors and controllers with and
without displays as well as humidity/temperature sensors.

Wireless Humidity/Temperature sensor
Battery-less sensor harvests it's own power supply from an
integrated solar cell.
Dimensions: 55 x 55mm or 63 x 63mm frame system.
The controller requires no installation depth behind the
mounting plate, and can therefore be bonded to any flat
surface. Adhesive foil is supplied.
Available in the same colours as the wireless switches &
flat switches.

Types Available

Humidity/temperature sensor
Humidity/temperature sensor with display
Temperature sensor with display
Temperature sensor
Temperature controller with display
 
FT Data sheet
| Operation Manuals - FTF55D | FTR55D | FTF55

Top of page
 

Waterproof temperature sensors for harsh applications

Wireless temperature sensors
Battery-less operation, powered by a solar cell
Has an accuracy of +- 0.8K.
Data logging every 100 seconds.
Transmission intervals of every 100 seconds with changes above
1.6K and every 1000 seconds with changes above 1.6K.
Measuring ranges from -200C - +600C.
Protection rating IP65.

Types Available

Outdoor temperature sensor
Duct temperature sensor
Cable temperature sensor
Pipe contact temperature sensor
 
SR65 Data sheet

Top of page
 
 
 

Wireless Hotel Card Switch

Wireless card switch for hotel environments and time
delayed off switching.

Wireless hotel card switch
The card switch generates it's own energy when the card is
inserted into the device.
When the card is inserted a wireless telegram is sent over the
wireless network.
The scope of supply comprises of the two-part card guide in the
same colour as the frame and an attachment frame, one mounting
base and one adhesive foil.
Dimensions: 80 x 80mm, 27mm high.
Available in the same colours as the switches & flat switches
FKF is used to switch control loads on a predefined time delay
when the card is removed or inserted.
 
FKF Data sheet
| Operation Manual

Top of page
 
 
 

Wireless Timer

Wireless timer with digital display and 8 channels

Wireless timer <• Power supply of 230V. Only 0.2 watt standby loss. • Date & automatic summer/winter time changeover. Two weeks reserve. Available in the same colours as switches flat switched except aluminium Up to 60 timer memory locations are freely assigned channels. Dimensions: 55 x 55mm or 63 63mm frame system.>
Power supply of 230V. Only 0.2 watt standby loss.
Date & automatic summer/winter time changeover.
Two weeks power reserve.
Available in the same colours as the switches & flat switched
except aluminium
Up to 60 timer memory locations are freely assigned to the
channels.
Dimensions: 55 x 55mm or 63 x 63mm frame system.
 
FSU55D Data sheet
| Operation Manual

Top of page
 
 
Home | Products | Downloads | Partners | Company | Contact
Kyasol