Kyasol - The home of green technology
 Lighting Control   Home | Downloads | Partners | Company | Contact  
 

Lighting Control

Room Control | Zone Control | Outdoor Lighting | Flush Mounting
 

Movement Sensor for Individual Room Control

Movement sensor PIR 360º for flush mounting.

Single room control 41-445
This sensor is a passive infrared sensor which reacts to temperatures
changes and movement by people.
The built-in sensor blocks off lighting during the day if there is sufficient
daylight. Lux level is set in the sensor.
Improved comfort
230V AC
4 Sensitivity-settings for tailored use
 
1) Daylight dependent - auto on/off via PIR
2) Daylight dependent - auto off via PIR
3) Movement only - auto on/off via PIR
4) Movement only - auto off via PIR
Accessory
IR remote (41-920)

How it works

How it works
 

Detection Range

 
Diameter indicated at table height. Plan view, diameter indicated at
floor height (mounted at height 2.5m)
Detection range

Planning

To ensure optimal detection at the to the room, reduce the distance
between door and sensor, when positioning the sensors. Effective
detection of a person is achieved at a minimum 0.8m height above
the floor.
 
41-400 Data sheet

Top of page
 
 
 

Movement Sensor for Zone Control

Minilux PIR movement sensor for zone control.

Zone control 41-445
Can be used in large areas
Up to 18 slave sensors can be connected to one relay.
Time delay off switch
Detection area 360°/Ø7m
230V AC
4 Sensitivity-settings for tailored use
 
1) Daylight dependent - auto on/off via PIR
2) Daylight dependent - auto off via PIR
3) Movement only - auto on/off via PIR
4) Movement only - auto off via PIR
Applications
 
Offices split into work areas
Exhibition premises
Conference premises
School premises
Open office area
Accessory
IR remote (41 920)
41-440 as slave sensor

How it works

how zone control works
 

Zone Application

  Zone application
 
Zone Control Data sheet

Top of page
 
 
 

Movement Sensor for Outdoor Lighting

Minilux PIR sensor suitable for controlling lighting in surrounding
outdoor areas.

Outdoor sensor 41-227
Responds to movement and temperature differences.
A built-in light sensor prevents the light to switch on during
the day.
Detection angle of 200° with a range of 3 - 14m.
The lighting switch can be switched on with an indoor switch which
switches off when the adjusted time expires.
Time delay of up to 12 minutes.
External setting of lux level, time and sensitivity.
The head of the sensor can be moved slightly up and down.
 

Detection Range

Detection Range
 
41-227 Data sheet

Top of page
 
 
 

Dual Movement sensor for flush mounting

An intelligent sensor that lets small movements keep the
lighting on.

Dual movement sensor 43-225
The sensor is self adjusting, which means it will find the optimal
setting for the area automatically.
Self adjusting "Fuzzy Logic".
No triggering errors.
Registers small movements down to 2 - 3cm.
Combines the advantages of infrared & ultrasound.
Error-free triggering Infrared & ultrasound combined.
E.g., a weak infrared signal and a strong ultrasound signal will be
sufficient to turn the lighting on.
Output for movement, light and ventilation.
Detection areas of 180° and 360°.
Different power supplies available:
- 230 V/24 V DC 1A
- 230 V/24V DC 40mA

Detecion Range

detecion range
 

Zone Application

  zone application
 
43-225 Data sheet

Top of page
 
 
Home | Products | Downloads | Partners | Company | Contact
Kyasol